Means of Controlling Light

Means of Controlling Light
okay I will post about controlling the means of lighting the lamp in
Means of controlling the lights in essence there are four important things, namely1. intensityTo control the light from light to dark or dark to light is usually used a device called a dimmer. With this tool, each unit diapsang lights on stage can be controlled from full lighting, slowly receding, to death at all, and vice versa. Which determines the intensity of the stage lights also powers other than dimmer lights (watt) and the dimensions of the lamp housing.A stylist can adjust the intensity of light required for the highest individual stage desired area lighting. Each and TIPA dimmer channels can be used to give balance cahay intensity from each source. Ideally it is expected that skeneri (atmosphere gestures on stage) every scene can be generated from each lighting source. The next scene may be composed of different lighting arrangement results in intensity although it is often used in the same channel dimmer.
 2. colorColor is also an important role as a means of controlling the intensity of light. In the advanced technologies that have long used the intensity of the electric light as a light main stage, in the XV century not only distinguish light intensity between comedy and tragedy, but also distinguish light wana order. Warm colors used for komdei light, while cool colors are used to light the tragedy. The conception of the color so it's still in general and is still widely used until the present, but also a lot of light colors surprises cleverly created the challenge.Use light colors on the stage is very attractive because of its unique properties. On the one hand, it has properties measuring objective therefore is certain, for example, the light source, the power of the lamp, the lamp housing, or filter media (filter) the color, everything is uncertain. But the highlight color when the light bounces off the object or the cast of the hit highlight, reflected color to the eyes of the audience that could change.On the other hand, the subjective nature of color have or have psychological factors as the willingness of the director is more interested in the reflection of the colors of the actors in the eyes of the audience. Thus, the necessary skills for an individual to process the lighting objketif factors and subjective. Not only required in-depth knowledge, but also mature experience to get the best results.
 3. distributionDistribution is the density, distribution, and direction of light. This would correspond well with the extent of the amount of light, the extent of the number of types of lighting fixtures, and the placement of the light position. Quality of especially light distribution provided by each type of equipment (special light bulbs or light bulbs general), the size of the light is determined by the use of dimmers, sharp or soft line is determined by the angle of light coming of light into the target, and so forth. Each of these tools depends on its type form different lighting effects. The locus of the lights were directed by kemamuan the lighting based on the plot of light (light plot). Bright light is directed to it, the light dim in point here, and so are all geared toward a target and arranged compositions platis and visual effect.There are three light distribution control devices are interconnected, ie1. general lighting control device that produces light scatter2. controlling device that has a special lamp light mengempal, and3. control devices that are in range of colors of light that highlighted the same object surface.Facts prove that skeneri, costumes, equipment, and even the makeup of the cast has the ability to absorb various hand and reflect light bulbs that need to be considered. It is very important to be taken into account in the distribution of light in a peemntasan. Even an actor who moves onstage merubahj light distribution can be calculated if not before. This is caused by the entire body, costumes, and equipment brought aadalah reflective as part of another set.
 4. movementMovement, namely changes in one or more of the quality of light. Light movement can occur because of several things:1. The movement is deliberately light-driven stage crew (manual) to follow the movements of actors (usually called the follow spot).2. Movement lights set mechanically (widely used disco lights).3. Movement bristling light (dim down) and menerang (dim up), the trend setting movement dimmer lights through tools that handle only be possible through stem mechanical or electrical devices.Only with modern electronic devices, it can be implemented. One operator control lamp (manual) can handle no more than three or four resistance (resistance) or autotransformer found on the hands (handle) dimmer and that too located in adjacent groups. Movement of light when the show is running must be done carefully. If not, feared to be misleading and escape the dramatic values ​​to be achieved.Moreover, the operator who controls the lights with lamps must have a full view of the stage. With demikia, he can coordinate the movements of light or the light changes with his movements. Movement lights will provide the quality of light dynamic range of performances if he follows the patterns of good composition that is based on the value of a sense of poetry, music, visual and performance levels (think theater).

Baca Selengkapnya »»

Lighting Function

Lighting Functionthis time I will post about lighting functions.In general, lighting serves to establish the situation, motion actors shine, and refine the expression for the creation of the character actor. Thus, the public's imagination to a particular situation, the tragic, the sublime, the escape from the everyday world or specific illumination.In particular, lighting can serve to1. Make choices for everything shownIt is very important for the light is able to act on the stage to let the audience be able to see comfortably and clearly. What looks will depend on a number of lighting, size of the object that is highlighted light, some objects the reflected light, the contrast with the background, and the distance of the object and the observer.2. Reveal shapesIf a staging of the play highlighted by ordinary light, then the cast, and equipment (property), and all parts of skeneri will appear flat or flat, uninteresting. Here does not appear sharp rays (high-light), no shadows, and monotony. In order for the affected objects visible light with reasonable shape, then the spread of high-beam should have a low degree of illumination that provides diversity yield difference between high and low-level lighting it.Disclosure forms essentially enhanced by the lighting. Angle and direction of light falling light special, to be mixed together carefully to produce a balanced exposure to the existing difference between the shadows and the shadows. Contrast and color diversity are also the parts that have to be distinguished so as to attract the attention of the audience.3. make a reasonable pictureIn the function, also including artificial light natural light create a picture that gives instructions on a day-to-day, local time, and season.4. a compositionComposing with light is the same as using light as a design element. This is related to the need skeneri, which objects should be highlighted with a low intensity / high until berkomposisi good, shadow patterns should also be considered.5. create an atmosphere (heart / soul)With the light settings is expected to create a feeling or mood including psychiatric effects created by the cast, supported by light.

Baca Selengkapnya »»

Principles and Applications 10 Tricks Color In Lighting

For this time I will post about the principles and application of color in lighting. for more details read this article.
PRINCIPLES ORGANIZATION OF LIGHTThe course reviews the theory in terms of light and a staging mencahayakan benefits. Pedestal given to the following:• The function and quality of light• Aspects of the light rekabentuk• The principle of electrically; recognize shapes series and parallel and use Ohm's law to solve the problem of currents, obstacles, Voltan and energy.• optical aspect - namely aspects of reflection and refraction of light in a variety of surface types and characteristics reflector of light refraction.• The type and function of the lights used in theater• The use color in a staging that includes about color theory and color guard• System pemalap [dimmer system] - manual and memory• Creating a 'light plot' and form 'lighting cues'
 10 TRICKS APPLICATIONS COLOR1. Application of bright colors on the outside of one of the elements, such as the red brick on the fence, into the accent for the entire house.2. Neutral colors for the facade of the building is better, but if you want to use a bright wana, apply in only one field.3. The combination of brown with green color can make a room more serene atmosphere.4. Light gray and green-brown able to bring brightness in the room.5. In the room that looks monotonous color, add artificial light so that the room is more "live".6. The colors are soft and dim artificial light that can provide warmth and familiarity atmosphere in living rooms and bedrooms.7. Game wall with natural color will make the room more spacious.8. Color natural wall different in each space will create a different atmosphere for each space.9. Red brick fences, walls dark gray, and gray-brown walls make the house look more dynamic.10. To eliminate dark impression in the bathroom, use a cream-colored ceramic on the walls and white on the floor.Elements of decor also utilizes light to help a certain atmosphere. For example, bright light during the day implies, or light blue implies ambience evening. Light color is also used to accentuate the particular scene or character.

Baca Selengkapnya »»

The elements of the lighting.

The elements of the lighting.
Okay this time I will post about lighting elements .. for more details, read the article below ..

            Within lighting there are some key elements that must be considered, such as:1. Availability of equipment and supplies. Namely the availability of sufficient lighting, cables, holders and some related equipment and electrical lighting. There is no standard for sure how much of the equipment, it all depends on the script needs to be staged.2. The layout and the focal point. The layout is the placement of the lights, while the focal point is the area of ​​the fall of light. In general, the placement of the lights in the play is over and from the front of the stage, so the focus point right on the stage area. In theory, the angle of placement and focus on the most effective titk was 450 on stage. But once again it all depends on the needs of the script. Another theory says ideally, Lighiting in a play (any kind of staging it) tatacahaya should illuminate every part of the stage, from the front, and back, up and down, left and right, and the middle section.3. Color balance. The point is the use of color harmony of light is needed. This means, lightingman must have knowledge of colors.4. Mastery of the tools and supplies. That is lightingman should have an understanding of the nature of light character of lighting fixtures. Tata is associated with the electric light, then you have to be careful if you're serving a light setter or the lighting.5. Understanding the manuscript. That is lightingman must understand the text which will be staged. In addition, it must understand the purpose and way of thinking director as 'supreme ruler' in the play.In a play, everyone plays an equal importance to each other. If one part is interrupted, it will disrupt the whole production process. Similarly, the "artisan lighting '. He also became an important part besides the director and actors, as well as make-up, stage manager, and other elements. In other words, lightingman must also have the same discipline with all the supporting performances.From the above, all of which can be achieved by learning about lighting and other supporting elements.

Baca Selengkapnya »»

Kinds of Light

Kinds of Light

Okay this time I will post about a variety of lamps in lighting. read the article below ..

Lights can not stand alone in the lights, but the obligation to chime in with electric wires as a conductor of electricity, as the lamp holder and dimmer as the light controller.
In general, there are three kinds of light, ie
1. general light bulbs, types of ordinary light, work light, and light "flood"
2. special light bulbs, types of spot lights, such as "ellipsoidal", "lekolites", "spherical", and "mirror"
3. mixed light bulbs, types of light strips, such as lampi border, footlights, light "backing", light siklorama
 
Three kinds of lamps that have individual character. Light bulbs light scatter properties, caused by light emitted from the lamp is reflected only through the light penetrates the glass reflector lamp. While the types of special lamps, light emitted from a lamp as reflected by the reflector and then refracted through the lens. Refraction through the lens causes the light beam integrated and out sharply. In its mix of light such as public lighting, just after the light reflected by the reflector and then refracted through the glass, colorful lights, one light one color, usually red, green, white or amber.

Several types of lamps specifically described below.
1. common light bulbs
2. mixed light lamp (strip)
3. special light bulbs (fresnellites)
4. special light bulbs (lekolites) (see Appendix 1)
 
Types of lighting according to the instructions in size, tipoe terapat three different lenses.
a. convex lens spot light
1. lens of 20 cm 1000-2000 watts
2. 9 cm lens 500-1000 watts
3. 250-400 watt 7.5 cm lens
b. lens spot light step (fresnell)
1. lens of 21/24 cm 5000 watts
2. lens 12.5 / 18 cm 2000 watts
3. Lens 12 cm 1000-2000 watts
4. 9 cm lens 250-750 watts
5. 4.5 cm 100 watt
c. 1. 18 cm 300-5000 10-120 watt beam
2. 12 cm 1000-2000 20-240 watt beam
3. 12 cm 250-750 15-180 watt beam
4. 18 cm 250-750 26-340 watt beam
5. 18 cm 300-5000 10-450 watt beam (see attachment)

Baca Selengkapnya »»

The term in the lighting.

The term in the lighting.

Okay this time I will post about in terms of lighting. This lesson recently I got from my teacher at school ... for more details, read the article below ..

1. light: light source, there are many, different types, such as the par 38, halogen, spot, follow light, focus light, etc..
2. holder: lamp holder.
3. Cable: electrically conductive.
4. Dimmer: tool to adjust the light intensity.
5. play light: light that serves to illuminate the stage as a whole.
6. foot light: light to illuminate the bottom of the stage.
7. wing light: light to illuminate the side of the stage.
8. front light: light to illuminate the stage from the front.
9. back light: lighting to illuminate the back of the stage, usually placed at the back of the stage.
10. silhouette light: light to form silhouette on a backdrop.
11. upper light: light to menerang the center of the stage, usually placed directly above the stage.
12. tools: lighting support equipment, such as circuit breaker (fuse), pliers, scissors, insulators, solder, hammer, tespen, cutter, avometer, switch, stopcontact, jumpers, etc..
13. series of light, which is installed in series or individually. (1 channel 1 lamp)
14. parallel light, which is installed in parallel (1 channel some lights).

As previously disclosed above, the simple things are what generally should be known by lightingman, then whether or not tatacahaya depends on understanding, experience and creativity of lightingman. Bottom line, if you want to be 'true lightingman', you have a lot to learn and try (trial and error).

Baca Selengkapnya »»

LIGHTING

Lighting

my first ever post about basic lighting and now I will explain in more detail what it is lighting

There are 2 main types of lighting are often used by photographers, namely:
High Key is a scene that looks more inclined to bright. The effects of high key lighting is relatively little a shadow, but it is important also some dark parts as that is not an indication that the high key over exposed.
Low Key is the opposite, just the part - the part that subjects given sufficient light, while the - the other in the dark shadows. It often happens also to get the misconception that low key effect is to make the under-exposed, the correct ratio is the ratio between dark and light.
Lighting has several functions, among others:
Key Light, is the main source of light for a certain character somewhere in the scene. If the object moves then use some key light
Fill Light, aim to fill (fill) the shadows caused by the key light. Because it must be avoided in order not to give rise to a new shadow, it is usually placed near the camera. Fill light can also use a soft light source. The quality of the soft light that does not cause a shadow to give freedom in the placement.
Back Light, placed above or behind the object to shed light on the head or over the shoulder.
In the lighting is sometimes necessary special effects. Another light effect that is often used is Eye Light, a small lamp with a strong light placed near the camera. Because the light is weak then he raises the fill light in the eyes of the actor, as well as its reflection would make her eyes sparkle. Last is the background light or light set, to give light on the wall or furniture.

Baca Selengkapnya »»

Animation

Animation
okey this time I will post about animation.Animation, or more familiarly called the animated film, is a film that is the result of the processing of hand-drawn so that it becomes a moving image. At the beginning of its discovery, the animated film is made from sheets of drawing paper and the re-"turn" so it appears the effects of moving images. With the help of computers and computer graphics, animation filmmaking becomes very easy and fast. Even lately sprung more than a 3-D animated film animated two-dimensional.
Shadow puppet animation is one of the oldest in the world. Even when electronics and computer technology has not been found, puppet show has complied with all the animation elements such as screens, motion pictures, dialogue and musical illustrations.
The process of making animationThere are two animated filmmaking process, such as conventional and digital. Conventional process in dire need of funds are quite expensive, while the digital process is quite mild. As for the case of repair, the digital process faster than the conventional process. Tom Cardon an animator who once worked with Hercules admit computer animation is quite a role. "Improvements to the conventional one time revision takes 2 days while digitally ranged takes only 30-45 minutes." [1] In a film dubbing can be done before or after the movie was over. Most dubbing done while the movie is still in process, but sometimes like in Japanese animation, voiceover actually done after the film was completed.
Animation 2DimensiConventional techniques
Celluloid technique (sometimes called cell only) is a fundamental technique in the making of the classic animated film. Once the image is becoming a series of movements that image is transferred onto a transparent sheet (plastic) that invisibility / cell (cell) and colored by the Ink and Paint Department. After completion of the film will be filmed with a special camera, the multiplane camera in the room were all black.
The main object is made separately by exploiting motion background and a static front. Thus, the background (background) and foreground (foreground) is made only once. This method can deal with that too much drawing.

    * Pre-production:
          o Concept,
          o Scenario,
          o Establishment of characters,
          o Storyboard,
          o Dubbing the beginning,
          o Music and sound FX
    * Production:
          o Lay out (layout),
          o Key motion (movement key / core),
          o In Between (Fig. connecting the core image to image other nuclei)
          o Clean Up (Clean image by tracing)
          o Background (background image),
          o Celluloid (Transferred onto transparent plastic)
          o Coloring (coloring with ink and paint).
    * Post-production:
          o Composite,
          o Camera Shooting (Pictures will be taken with the camera, taking frame-by-frame),
          o Editing,
          o Rendering,
          o The transfer of the film into the film roll.
Digital Techniques
After the development of computer technology in the 80's, the two-dimensional animation process easier. Is a very real perceived ease the animation process. For the cultivation of simple animations, ranging from the design models to filling sound / dubbing can be done by using a personal computer. Any errors can be corrected quickly and can quickly change also held. While the conventional technique, every detail errors sometimes had to be started again from scratch. 2Dimensi digital animation creation process consists of:

    * Pre-production:
          o Concept,
          o Scenario,
          o Establishment of characters,
          o Storyboard,
          o Dubbing the beginning,
          o Music and sound FX
    * Production:
          o Lay out,
          o Key motion,
          o In Between,
          o Background,
          o Scanning
          o Coloring.
    * Post-production:
          o Composite,
          o Editing,
          o Rendering,
          o The transfer movies into a variety of media such as VCD, DVD, VHS and more.
Animation 3DimensiThree Dimensional, normally used in the handling of graphics. 3D in general refers to the ability of a video card (link). Currently the video card uses a variation of the instructions embedded in the video card itself (not from software) to achieve a more realistic graphics in playing computer games.

Baca Selengkapnya »»

Understanding Printer

This time I will post about the printer. What sense printers, printer parts, and how to maintain the printer. For more details, read the following article.

UNDERSTANDING THE PRINTER
Printer is one of the hardware (hardware) connected computer and have a function to print text, images and tampilanlainnya from computer to paper or similar media. The term is known padaresolusi printer called dpi (dots per inch). That is a large number titikdalam area 1 inch wide. The higher the resolution the better the prints produced. Conversely, if the resolution is low then the results cetakanakan bad / not good.

PRINTER PARTS
1) Casing printer
2) the operator panel
3) Place the paper feeds
4) Place the paper exit
5) The front cover

Printer parts
- Tray is a place to put the paper.
- Picker as a tool to take the paper from the tray.
- Ink or toner printer is a device that is used to write or print on paper. Ink and Toner have differences on the system. Require heating or laser toner, ink or inkjet while not need heating, just cleaning or cleaning the print-head printer.
- Flexible cable for signal transmission from the processor to the printer ink or toner. These cables are thin and flexible, yet powerful.
- On the back of the printer usually parallel or USB port for connecting to a computer.

 HOW TO MAINTAIN THE PRINTER
1. The printer should be used regularly. Kedaan Do not leave the printer off for a long time. Turn on the printer at least 1 times 48 hours. If the colors do not just menggunaannya printer to print black only, use the same to print color images for all printer head work. If print quality has declined printer do the cleaning by doing print head clean with the facilities that already exist in the printer software. Do keep the print head clean up the quality improves.
2. In reload / refile, avoid touching the pin CMOS image while the crossed hands. Pin is extremely sensitive or may be damaged if exposed to static electricity in your body.
 3. to avoid chemical reactions in the printer, then use the same brand of ink charging
 remanufactured ink.
4. Use a neat paper when printing. It is intended that the print head is not easily damaged due to the uneven surface of the paper.
5. Clean tertur printer from dust and dirt. Use a small brush to be part of one in the printer can be affordable.
6. Use a cloth to cover the printer when not in use to avoid dust, do mentup printer too tight, as this may cause the printer to become moist, objec this can cause damage to printer components.
7. If the printer is often used (usually in the office - the office) do not turn off the printer after delesai used for printing, if the printer will be used again. Let the printer is turned on, this is to minimize over caunter hit, the limit caunter BIOS. Every printer has its limitations for printing typically 2000 times. Every time we turn on the printer then the counter will increase and considered 1 time scoring, just think we work for 8 hours and we turn off the printer 20 times in 8 hours of work, then the time to reset the counter in the BIOS.
8. Do not be too often print pictures or writing with a thick FILL it mengkibatkan head works hard so it will be easily damaged.
9. If your printer has been modified by using the infusion, it is better to put the infusion tube is parallel or lower than the printer, it is intended that the ink does not flow by itself when it is not active.
10. Clean foam or sponge sucking the rest of the ink from overflowing ink, ink may spill menyebebkan surge in electronic components printer. Cleaning sponge should be done once a year.

Baca Selengkapnya »»

How To Care Propely Handycam

Okey this time I will post about the handycam, handycam how to care for it well. For more details, read the following article.

Handycam
• Handycam is a multimedia tool that is used to take pictures / videos shaped object. Handycam is almost similar to the camera.
• Parts - Parts handycam
• The s / off
• The remote capture
• Lens
• Harddiks depends on whether he uses harddiks handycam
HOW TO MAINTAIN handycam
1. Do not put a really cool video to the camcorder. Moisture from the warmer air tends to condense on the video (like that fog your glasses when you get into in the winter), and that moisture can cause the ribbon attached to a rotating drum. Recording will get wrapped around the drum, destroy tapes and possibly damage the video heads.
2. The battery should not be left in the camcorder is not in use. Some cameras draw a small, but constant current even when switched off
3. Purchase "memory free" old camcorder batteries when replacing batteries. Batteries style allows you to use the battery for a short period of time, and content without developing a situation where the battery will only be charged for short-term use.
4. Do not leave the camera in a hot car cassette.
5. Do not put a label on camcorder footage where they can interfere with the door opening record. This can cause the cassette jammed in the camera.
6. We recommend that a technician to clean the tape heads when they get dirty. This will help maintain the life of the head.
7. Check whether packnya Battery is fully charged or not, if not should be in Charge (The contents of return) in an attached Batttery Camera / Video Handycam. Recharge can also be done outside the Camera / Video Handycam if any tools. (Should have a battery backup)
- Prepare New Memory Stick; Sony DVD-R 30min Or any other type of new / blank for use. and enter kedalan Camera / Video Handycam (or should have Caset Memory backup / data storage memory that has many species
- Make checks all control knobs are there to work or not, if not please in the report to the Dive Shop if still under warranty. Can also be a way of buying a new one.
- Check the button - the Operational Housyng Camera / Video Ikelite Housyng if there is any sign of cracking, if any help in report. To the Dive Shop if the warranty period. For in check existing cracks, leaks can occur or not. Pula can buy a new one

Baca Selengkapnya »»

Understanding Hardisk

I want to post an article that aims to make you know what exactly the hard drive it, divided over how hard and hard parts. For more details, read the following article.

understanding Hardisk
Hard drive storage is designed to be used to save the data in a large capacity. This is a background application that does not allow programs to be in one disk and also require large storage media files such as a database

function Hardisk
• Notebook serves as a primary data storage on a computer or laptop
Types of Hard Drive

 

-          ATA
AT Attachment (ATA) is an interface standard for Menghu ¬ bungkan storage devices such as hard disk, CD-ROM, or DVD-ROM drive on the computer.
ATA stands for Advanced Technology Attachment. ATA Standard is managed by a committee named X3/INCITS T13. ATA also has several other names, such as IDE and ATAPI. Since the introduction of the latest version of the ATA called Serial ATA, ATA version is then called Parallel ATA (PATA) to distinguish it from the new version of Serial ATA.

-           SATA
SATA is the development of the ATA. SATA is defined as a technology that is designed to replace the ATA in total. Serial ATA adapters can accommodate data transfer speeds higher than a simple ATA

Notebook parts

platter
 Form a plate or dish that serves as a storage data.Berbentuk round, a compact disc, has a magnetic pattern on the flanks permukaanya.Platter metal containing millions of tiny magnets called magnetic domain.Domain-this domain arranged in one or two directions to represent the binary "1" and "0"

In this dish consists of some of the tracks, and some sectors, where track and sctor this is a data storage and file system. For example, our hard drives with a capacity of 40 GB, when the format was not until the 40 Gb capacity. because they have no trac and sectors used to store the ID is the identifier of formatting the hard drive.

The number plate of each disk is different, depending on the technology used and the capacity of the hard-disk each harddisk.Untuk latest release, usually a plate has a capacity of 10 to 20 Gigabyte.Contohnya a capacity of 40 Gigabyte hard drive, usually consisting of two plates, each with a capacity of 20 Gigabyte.

Spindle
Spindle is a place to put platter.Poros shaft has a drive that serves to rotate the disk plate called a spindle motor.Spimdle whose role is involved in determining the quality the faster hard drive because putaranya, meaning the better the quality harddisknya.Satuan to measure the velocity is Rotation Per Minutes or referred RPM.Ukuran we often hear for the rotational speed of 5400 RPM, among others, 7200 RPM or 10000 RPM.

Head
This tool serves to read the data on the surface of the plate and the plate dalamnya.Setiap record information to disk has two surfaces head.Satu above and the other below the surface.

Head is in the form of an electromagnetic device that is placed on a surface plate and attaches to a slider.Slider attached to a handle which is attached to the actuator arm mounted arms.Actuator dead on the actuator shaft by a board called the logic board.

Therefore, when the hard work should not be any shock or vibration, because the head can swipe hard disk so that it will lead to bad sectors, and can also cause damage that Head Hard disk can no longer read the Track and Sector of the hard disk.

Logic Board
Logic Board is a board operating on the hard drive, which contained the logic Board Notebook Bios so hard when connected to the Mother Board automatically recognize the hard drive, such as Maxtor, Seagete etc.. besides the Logic Board Bios hard drive is also a switch or Power Supply and distribution of data from the hard drive to the motherboard Head Board for ki control by Processor.

Setting Jumper
 Each hardis has jumper settings, function to determine the position of the hard drive.

 
IDE connector
Actual Axis
 Is a shaft for a handle or a robotic arm that can be read sctor Head of the hard drive.—
Is the connecting cable between the hard drive with matherboard to send or receive data.

Ribbon Cable

Ribbon cable is the liaison between the Head to the Logic Board, where each document or data read by the Head will be sent to the Logic Board to the next in order to send to Mother Board Processor can process the data in accordance with the received input.

Currently the average hard drive is already using the system so it does not require a SATA ribbon cable (Cable IDE)
When installed on a computer hard drive 2 pieces, then by setting Setting Jumper we can determine where the hard drive where the Primary and Secondary hard disk is usually called Master and Slave.
Master is the main hard drive where the system is installed, while the Slave is the second hard drive is usually required for storage of documents and data. When Jumper setting is not set, then the hard drive will not work.
Power connector
 Is a source of direct current from the power supply.— Power supply to the hard drive there are two parts:
1. Voltage 12 Volt, serves to move the disc and mechanical as Head.
2. Voltage of 5 volts, is used to power on the Logic Board mesupply to work to send and receive data.

Baca Selengkapnya »»

BASIC SCRIPT WRITING TELEVISION ADVERTISING

In making television advertising copy must meet the basic principles are:In designing the script, we set the dialog sequence elements in detail. Designing the script is a complete specification of the text and narration in television advertising. To write a script different from TV commercials and print advertising copy manuscript company profile or Web site. Because TV advertising time is short (usually 30 seconds) then the words should be concise, easy to pronounce and easy to remember. With 30 seconds solving the main problem consumers demonstrated using superior products advertised. If the product is too large, then at least the logo or company name to be displayed on TV ads.There are several considerations in writing advertising copy that effective television, among others:- Understanding of sight, sound and motion. Each of these elements is needed and used. Should be associated with the perception of the message you want the audience. Make certain that the advertised roduk audio displays according to the image displayed.- The word ditampilan in advertising images and thus mengiterprestasikan further.- Display advertising on television is generally more effective in appearance than in words, the ability of video to communicate with the audience should be more prominent.- A number of scenes are carefully planned, too many scenes tend to make the audience confused.- Display a television ad running event, the audience will follow easily.- Basically, television is a medium that is "Close-up". Television screen is usually too small to reveal in detail the scene in the ad. Long shots can be more effective to build "background", but it is not effective to display the superiority of the product.- The scene in the television ads are taking more time than reading copy (narration) by voice directly, then enable the time in advertising is important, because the scene is usually time-consuming, do not just read the script, but the scene that appears.- Using the slogan (a word that is easy to remember and draw attention) as the basic theme, so the audience sees and hears the advertised product excellence.- If possible, show the name of the brand, if you want to stand the camera shots or logo on packaging to build brand identification.- Communicate the basic idea, avoid the additional benefit of not too obtrusive. Make sure the words are used as image ditampilan.- Read out loud audio for attention.- Write sentences short and uncomplicated structure. Use everyday words.- In writing this video description, describing scenes and events as possible.

Baca Selengkapnya »»